KNIVES READY TO SHIP

IMG_0481.jpg
IMG_0494.jpg
IMG_0487.jpg

This is the first Crawford Butterfly Knife. The knife is 9 inches overall with a 3 3/4 inch Stainless Steel Chad Nichols damascus blade. The handles are a three layered Mokume with file work. The back spacers and lock are Damascus.

$1,000.00 SOLD

DSC_0121_edited-1.JPG
DSC_0122_edited-1_edited.jpg
DSC_0119_edited-1.JPG

The Bulldog.  A fixed blade designed by Bob Kasper. Each Bulldog comes with kydex sheath.  Wes made the blade from CPM S30V, 5 3/4 inch double edge black G10 handle, DLC coated blade. The honey-combed tapered tang keeps the weight down.  All sheathes are handmade by Wes.   $595 

DSC_0068.JPG
12319.jpg
2017 Jul 26_2145_edited-1.JPG

KASPER SCORPION.  Wes has some of these finished and ready to ship.  These are taking the place of the Kasper Fixed Fighter numbered series.  They were made with a tough black DLC finish S30V blade.  They are 9 1/2" long overall with a 4 1/4" blade. Tapered tang.  Notched thumb ramp for sure grip.  Comes with a sharpened top edge for a full tactical knife.  Some will not have the top edge sharpened due to the laws in some states.  These are fitted with a Kydex sheath with reversible belt loop, "J" Hook and deep concealment "S" Hook. Put your order in today.

*****Please specify if you do not want the top edge sharpened.  Engraved "Crawford" on blade.

$500

IMG_2299.jpg
IMG_2298.jpg
IMG_2297.jpg

Check out our Double Tap page for prices and information on our new Double Tap knives!

IMG_2300.jpg
IMG_2941.jpg
IMG_2934.jpg
IMG_2935.jpg

Mokume Kasper

Wow! This kasper turned out awesome. It has a 3 7/8 Chad Nichols stainless steel flipper blade with file work. The handle scales have been made from wooly mammoth tooth with red G10 Liners. The front and rear bolsters are made from a three toned mokume. It has titanium liners with file work, engine turning and two-toned anodizing. the back spacer and pocket clip are also made from titanium and have matching file work and two-toned anodizing. It has bronze washers with a file work pivot pin. This is one pretty kasper for $2200

Blackened Blue Skull Kasper

has a Chad Nichols stainless steel Damascus blade with flipper and sypder co hole and decorative file work. The handle consists of titanium liners, with bronze washers that have been engine turned, file worked, and anodized blue. The bolsters are titanium with engine turning and blue anodizing, marble carbon fiber handle with skull insert. Titanium back spacer with file work and anodized blue. Also has a titanium pocket clip with decorative file work, engine turning and matching blue anodizing. $995

IMG_2788.jpg
IMG_2787.jpg
IMG_2786.jpg
IMG_2739.jpg
IMG_2738.jpg
IMG_2740.jpg

Kasper Folder fresh out of the shop. S30V blade with flipper and spyder co hole, dressed up with nice file work. has titanium liners, sporting engine turning, file work, and bronze washers. Carbon fiber Handle weave pattern with skull inlay. titanium bolsters, dove tail fitting with engine turn finish. titanium pocket clip with file work and engine turning. pivot pin is also file worked. carbon fiber backspacer keeps this knife extra light for its size. $850 SOLD

Kasper Folder fresh out of the shop. S30V blade with flipper and spyder co hole, dressed up with nice file work. has titanium liners, sporting engine turning, file work, and bronze washers. Marble Carbon fiber handle pattern with skull inlay. titanium bolsters, dove tail fitting with engine turn finish. titanium pocket clip with file work and engine turning. pivot pin is also file worked. carbon fiber backspacer keeps this knife extra light for its size. $850

IMG_2742.jpg
IMG_2741.jpg
IMG_2744.jpg
IMG_0006.jpg
IMG_0010.jpg
IMG_2270.jpg
IMG_2271.jpg

Copperhead Kasper

this is a beautiful Kasper that has just come out of the shop. it is sporting a s30v flipper blade with spyder co hole, file work and DLC coating. it has titanium liners that have file work, engine turning and has also been DLC coated. it has a carbon fiber backspacer. double black G10 contoured handle scales. beautiful bronze bolsters with engine turning. it has a titanium pocket clip that has engine turning, file work and DLC coating. also has bronze washers for a smooth action. this one is ready for delivery 

$850

IMG_3312.jpg
IMG_3310.jpg

Crawford Lock

This lock was designed by my father, Pat. It consists of a one piece back spacer spring lock. It has titanium liners that have been engine turned, file worked and anodized blue. It has Matching bolsters and blade from Chad Nichols stainless steel Damascus. Has a jeweled thumb stud. A beautiful set of mastodon scales with a titanium pocket clip. $1350

IMG_2940.jpg
IMG_2939.jpg

Mid-Size Kasper

This is a new size to the kasper line, it has a 3 1/2-inch blade made from S30V and has file work all around. It has an overall length of 8 1/4 inches, sporting titanium bolsters that are contoured and engine turned. It has weave patterned carbon fiber handle scales with a skull insert, titanium liners that have been engine turned and file worked, matching titanium pocket clip with file work and engine turning. carbon fiber back spacer keeps the weight of the knife down to around 4 oz. $750

IMG_0416.jpg
IMG_0415.jpg

Kasper Folder

 Damasteel Damascus blade, bolsters and thumb stud. Blue sapphires in the thumb stud. Titanium liners with file work and anodized blade.  Wooly Mammoth Tusk Handle and matching damascus pocket clip with decorative holes. $2500

IMG_3298.jpg
IMG_3299.jpg

Kasper Folder

This kasper has a 3 1/2-inch CPM S30V blade with a flipper and spyder co hole opener and file work. It has titanium liners that have been engine turned and file worked. It features a carbon fiber back spacer, titanium bolsters with engine turning, carbon fiber handle scales with a skull insert and a titanium pocket clip with engine turning and file work. This is a great size knife. $800

IMG_3538.jpg
IMG_3533.jpg
IMG_3536.jpg

 

Crawford Butterfly Knife

This butterfly knife is fresh out of the shop with a 9 inch overall length and a 3 3/4 inch cutting edge. The blade is made from Mike Norris stainless steel hornets nest damascus. It has titanium handles with file work, engine turning and a beautiful set of natural color blue/green mammoth ivory handle scales. it features a damascus backspacer and lock. $1000

 

IMG_3304.jpg
IMG_3305.jpg
IMG_3301.jpg
IMG_3300.jpg

Kasper Folder

This is our popular kasper folder but in a 3 1/2-inch model. This has titanium liners and pocket clip, both with engine turning, file work and blue anodizing. It has a beautiful set of wooly mammoth handle scales. Has titanium dove tailed fitted bolsters with engine turning. It has a stainless steel Chad Nichols damascus blade with file work and spyder co hole. $1150

Black Chrome 2.JPG

BLACK CHROME KASPER

This beauty looks like "Black Chrome" to me.  I made this Kasper Flipper Folder with polished Titanium, engine turned, black DLC, file-worked handles.  It has a carbon fiber back spacer. I used my method of thinning and rolling down the Titanium to make this handle a little smaller and lighter but left the S30V, satin finished, black DLC blade with a Spyderco Hole opener, the same size at 3 7/8 inch.  There is engine turning on the flats of the blade. The knife is put together with torx micro screws.  There are serrations in the thumb ramp to give you a sure grip.  Overall length is 9". It is lightweight at about 5 ounces.  The pocket clip is satin-finished Titanium, file worked, engine turned and black DLC finished.  Pictures cannot capture the beauty of this knife.   It looks even better when you hold it in your hand.   $850 

Kasper Folder

This is our popular kasper folder but in a 3 1/2-inch model. This one has a CPM S30V blade with a spyder co hole and file work. It has titanium liners, bolsters and a pocket clip with engine turning and file work. It has an impressive set of polished giraffe bone handle scales with a lanyard hole. $825

IMG_1556.jpg

Crawford Karambit
Karambit with green skull kydex sheath, belt loop and J hook $460

12319.jpg
12319.jpg
12319.jpg

Stainless Steel Survival Straw, with knurling and notches on the handle for a good grip and tough black DLC finish to keep it more scratch resistant.  Comes with kydex sheath with "J" Hook for inside the waistband carry.   $85

DSC_0222.JPG

PUSH PICK.  It is an Ice Pick, a Push Dagger, glass breaker or a Kubaton. A very unique concealable weapon, that is great for covert collectors. Completely hand made from the finest materials. The handle is made out of solid aircraft aluminum, heavy knurled and anodized hard coat black. The 3" blade is stainless steel 440C heat treated to a black finish, and screws in and out. 

Very light and strong. The blade stores in the handle and can be carried in your pocket. They all have removable key chain attachments now.  It punches holes in car doors, no problem.  Just drop it your pocket.  The new models have a lanyard or key ring.  $100

SATIN-FINISHED STAINLESS STEEL SURVIVAL STRAW. Satin-Finished with knurling and notches on the handle for a good grip.  Comes with kydex sheath with "J" Hook for inside the waistband carry.  $75 

Credit Card Karambit

$50
12319.jpg
DSC_0334.JPG

DEVIL DART.  The Devil Dart is an all steel 440C knife. It is designed and refined after seeing the OSS sleeve dagger from World War II. The blade is triangle shaped for strength and easy penetration. The handle is knurled for a sure grip. Each dart is individually hand ground and bead blasted for the highest quality.  The Devil Dart is 5/16" diameter, 3 1/2" blade, 7" overall length. Tungsten DLC black coated and comes with a kydex sheath with a stainless steel ball chain to be worn around the neck and a "J" Hook for inside the waistband carry. (See this dart in the Knives Illustrated 2018 Buyer's Guide).

$145

TITANIUM DEVIL DART WITH KYDEX SHEATH AND STAINLESS STEEL BALL CHAIN - $225 

IMG_3304.jpg
IMG_3305.jpg
IMG_3301.jpg
IMG_3300.jpg

Kasper Folder

This is our popular kasper folder but in a 3 1/2-inch model. This has titanium liners and pocket clip, both with engine turning, file work and blue anodizing. It has a beautiful set of wooly mammoth handle scales. Has titanium dove tailed fitted bolsters with engine turning. It has a stainless steel Chad Nichols damascus blade with file work and spyder co hole. $1150

Black Chrome 2.JPG

BLACK CHROME KASPER

This beauty looks like "Black Chrome" to me.  I made this Kasper Flipper Folder with polished Titanium, engine turned, black DLC, file-worked handles.  It has a carbon fiber back spacer. I used my method of thinning and rolling down the Titanium to make this handle a little smaller and lighter but left the S30V, satin finished, black DLC blade with a Spyderco Hole opener, the same size at 3 7/8 inch.  There is engine turning on the flats of the blade. The knife is put together with torx micro screws.  There are serrations in the thumb ramp to give you a sure grip.  Overall length is 9". It is lightweight at about 5 ounces.  The pocket clip is satin-finished Titanium, file worked, engine turned and black DLC finished.  Pictures cannot capture the beauty of this knife.   It looks even better when you hold it in your hand.   $850 

Kasper Folder

This is our popular kasper folder but in a 3 1/2-inch model. This one has a CPM S30V blade with a spyder co hole and file work. It has titanium liners, bolsters and a pocket clip with engine turning and file work. It has an impressive set of polished giraffe bone handle scales with a lanyard hole. $825

IMG_1556.jpg

Crawford Karambit
Karambit with green skull kydex sheath, belt loop and J hook $460

12319.jpg
12319.jpg
12319.jpg

Stainless Steel Survival Straw, with knurling and notches on the handle for a good grip and tough black DLC finish to keep it more scratch resistant.  Comes with kydex sheath with "J" Hook for inside the waistband carry.   $85

DSC_0222.JPG

PUSH PICK.  It is an Ice Pick, a Push Dagger, glass breaker or a Kubaton. A very unique concealable weapon, that is great for covert collectors. Completely hand made from the finest materials. The handle is made out of solid aircraft aluminum, heavy knurled and anodized hard coat black. The 3" blade is stainless steel 440C heat treated to a black finish, and screws in and out. 

Very light and strong. The blade stores in the handle and can be carried in your pocket. They all have removable key chain attachments now.  It punches holes in car doors, no problem.  Just drop it your pocket.  The new models have a lanyard or key ring.  $100

SATIN-FINISHED STAINLESS STEEL SURVIVAL STRAW. Satin-Finished with knurling and notches on the handle for a good grip.  Comes with kydex sheath with "J" Hook for inside the waistband carry.  $75 

Credit Card Karambit

$50
12319.jpg
DSC_0334.JPG

DEVIL DART.  The Devil Dart is an all steel 440C knife. It is designed and refined after seeing the OSS sleeve dagger from World War II. The blade is triangle shaped for strength and easy penetration. The handle is knurled for a sure grip. Each dart is individually hand ground and bead blasted for the highest quality.  The Devil Dart is 5/16" diameter, 3 1/2" blade, 7" overall length. Tungsten DLC black coated and comes with a kydex sheath with a stainless steel ball chain to be worn around the neck and a "J" Hook for inside the waistband carry. (See this dart in the Knives Illustrated 2018 Buyer's Guide).

$145

TITANIUM DEVIL DART WITH KYDEX SHEATH AND STAINLESS STEEL BALL CHAIN - $225 

2017 Nov 30_2889.jpg
2017 Nov 30_2889.jpg
DSC_0052_edited-1.JPG
DSC_0052_edited-1.JPG

Lynn Thompson of Cold Steel has put on a new knife designed by me. It is $50 retail, which is a very good deal. I love it! It has great action. It also has a safety button. It is called the Crawford 1. 

 

I am very proud of it. This is a great knife and, as you know, Cold Steel stands behind their products.   See four pictures of the knife below:  

DSC_0061_edited-1.JPG
DSC_0059_edited-1.JPG
DSC_0062.JPG

Lynn Thompson of Cold Steel has put on a new knife designed by me. It is $50 retail, which is a very good deal. I love it! It has great action. It also has a safety button. It is called the Crawford 1. 

 

I am very proud of it. This is a great knife and, as you know, Cold Steel stands behind their products.   See four pictures of the knife below:  

DSC_0061_edited-1.JPG
DSC_0059_edited-1.JPG
DSC_0062.JPG

NECK KNIVES

12419.jpg
  • NAME:  KASPER NECK KNIFE

  • BLADE LENGTH:  3 1/4 INCHES 

  • HANDLE LENGTH:  4"    

  • OVERALL:  7 1/2  INCHES 

  • FINISH:   DLC

  • NOW MADE WITH S30V STEEL

  • KYDEX SHEATH WITH "J" HOOK AND BELT LOOP

  • PRICE:  $165.00

12419.jpg
  • NAME:  DROP POINT NECK KNIFE

  • BLADE LENGTH:  3 INCHES  

  • OVERALL: 6 INCHES

  • FINISH: DLC

  • 154CM STEEL

  • KYDEX SHEATH

  • PRICE: $145.00

12419.jpg
  • NAME:  TANTO NECK KNIFE 

  • BLADE LENGTH:  3 INCHES  

  • OVERALL: 6 INCHES

  • FINISH: DLC

  • 154CM STEEL 

  • KYDEX SHEATH

  • PRICE: $145.00

Missile.jpg
  • NAME:  MISSILE NECK KNIFE

  • BLADE LENGTH: 3   INCHES  

  • OVERALL:  6 INCHES

  • FINISH: BEAD BLAST

  • S30V STEEL. 

  • BUILT IN FIRE STARTER.

  • KYDEX SHEATH

  • PRICE: SPECIAL WITH  SURVIVAL STAFF™ ADAPTER TO MAKE A SPEAR:  $150.00

Hog Spear.JPG

Heavy duty Hog Spear with DLC finish

19" overall with a 12" blade and DLC coated. Comes with sheath, as shown. This screws into the end of the Survival Staff after removing the steel tip. You can wear it on your belt until then.  Wes won't make these for long so you better get one while it is available.  

 

Now only $525

Hog Spear1.JPG
2018 Apr 05_3228_edited-1.JPG